Atheros Communications. Inc，ATHR (NASDAQ)，中文名为创锐讯通讯技术有限公司，
是1998年5月由斯坦福大学的Teresa Meng博士和斯坦福大学校长，MIPS创始人John
Hennessy博士牵头共同在硅谷创办的一家高科技芯片公司，在2004年2月12日在美国
NASDAQ上市。在无线局域网芯片技术，手机无线芯片，千兆以太网芯片，GPS芯片，蓝牙
芯片都有非常高的技术领先度和市场领先度。特别是无线局域网芯片全球市场占有率第
一。上海分公司目前为其最大的海外分公司。现已被高通收购（Qualcomm），前景更好
啊。
有的职位应届生也可以试试，有需要的校友可以把简历发到
成电97级校友yjun邮箱：
yjun@atheros.com 由于职位太多，请大家投简历时把前面的编号带上。
JD如下
1. Job Title: Digital Verification Engineer
Req Number: 1 will open
QUALIFICATION (DETAIL):
EDUCATION:
Bachelor or Master degree in Electrical Engineering or Computer science or
related field.
EXPERIENCE:
Network protocol and system knowledge highly desirable (Ethernet, IP, ATM,
SONET, DSL, EPON/GPON)
Complete asic design/verification cycle from spec to product
Test bench and test case development using Vera/SpecmanE/SystemVerilog/
Verilog/script is required
Understanding of Coverage tools
Understanding of DFT/Test vector generation/debugging
Understanding of Gate Level simulation
Knowledge of Serdes, DDR memory, SOC/CPU, interfaces is big plus
Documentation in English is highly desirable
Detail and discipline oriented
Experience in verification of complex chips
2 year of related field experience minimum
DESCRIPTION OF FUNCTION & RESPONSIBILITY:
Responsible for chip/block level design and verification: verification
strategies, test plans, test case development
using Vera/SystemVerilog/Verilog, Coverage analysis, DFT and functional test
vector development
2. Job Title: Software Engineer
Req Number: 2010676
QUALIFICATION (DETAIL):
EDUCATION:
Bachelor or Master degree in computer science, computer engineering, or
related field
EXPERIENCE:
5+ years experience in in telecommunication system development.
Proficient with C/C++ programming languages.
2+ years experience in GPON software with focus on OMCI and application
design and implementation.
Interested in and experienced with open source GPL software development.
Knowledge of object oriented design and programming techniques
Experience on ethernet networking protocols and traffic management.
Hands on experience with real time systems.
DESCRIPTION OF FUNCTION & RESPONSIBILITY:
Design and develop GPON software.
Interface with Asic design team.
Optimize current software implementation.
3. Job Title: Sr. Software Engineer
Req Number: 2 will open
QUALIFICATION (DETAIL):
EDUCATION:
B. Sc in E.E. or C.S., or above
EXPERIENCE:
4 or more years related experiences.
Proficient with C/C++ programming languages.
2+ years experience in EPON software with focus on OAM design and
implementation.
Interested in and experienced with open source GPL software development.
Knowledge of Object oriented design and programming techniques
Experience on Ethernet networking protocols and traffic management.
Hands on Experience on Real Time Systems.
DESCRIPTION OF FUNCTION & RESPONSIBILITY:
Responsible for 10G OLT software design and development
4. Job Title: Sr. Software Engineer
Req Number: 2 will open
QUALIFICATION (DETAIL):
EDUCATION:
- Master in EE or CS.
EXPERIENCE:
- 4+ years in embedded firmware development
- experience in networking protocols
- experience in C and Linux programming
- good knowledge in RTOS
DESCRIPTION OF FUNCTION & RESPONSIBILITY:
Design and develop software and firmware for ABU SOCs. Performing customer
support job functions.
5. Job Title: Sr. Software Engineer
Req Number: 1 will open
QUALIFICATION (DETAIL):
EDUCATION:
B. Sc. of E.E. or C.S., or above
EXPERIENCE:
4 years related experiences or more
2+ years experience in DOCSIS software with focus on SNMP design and
implementation.
Proficient with C/C++ programming languages.
Knowledge of Object oriented design and programming techniques
Experience on networking protocols.
DESCRIPTION OF FUNCTION & RESPONSIBILITY:
responsible of DPoE software design and development.
6. Job Title: Software Test Engineer
Req Number: 2 will open
QUALIFICATION (DETAIL):
EDUCATION:
Computer, Electron ,etc related,Bachelor degree or above
EXPERIENCE:
At least 2 years working experience in related field
DESCRIPTION OF FUNCTION & RESPONSIBILITY:
1. Computer, Electron ,etc related,Bachelor degree or above .
2. Experienced with automatization test and TCL.
3. Good English skill with read and write.
4. Familiar with Smartbits, IXIA, N2X ...
5. Good understanding in IP network infrastructure and principle
6. Good communication and interpersonal skills
7. At least 2 years working experience in related field
7. Job Title: System Engineer
Req Number: 1 will open
QUALIFICATION (DETAIL):
EDUCATION:
bachelor or master
EXPERIENCE:
1,More than 4 years hardware design experience
2,Familiar with XDSL,PON,Switch acknowledge
3,Familiar with ARM,MIPS,Power PC CPU Chip
4,Familiar with Orcard,Allegro EDA tools
5,Familiar with CPLD or FPGA
DESCRIPTION OF FUNCTION & RESPONSIBILITY:
1,Certification and reference board design and testing
2,ASIC level hardware testing and support
3,Key customer support
4,Board maintain
5,Generate BOM and write design specification and hardware user manual.
8. Job Title: Software Engineer
Req Number: 2011056 &2011057 &2011058
QUALIFICATION (DETAIL):
Education:
Bachelor or Master degree in Software Engineering, Computer Science, or
related field
with 5+ years related experience
Experience:
_ Interface with the ASIC teams on chip features and programming model
_ Develop and maintain key features for WIFI software on Windows OS platform
_ Support software releases during test and release cycles
_ Experience with wireless drivers and/or other networking drivers
_ Knowledge of networking protocols and security concepts
_ WIFI development experience is highly desired
_ Familiarity with hardware debugging
_ Experience in release processes, build and packaging
_ Windows OS or Unix/Linux driver experience
_ Excellent verbal and written communication skills
_ Experience with embedded platform development
_ Experience with full software life cycle and delivery mechanisms
_ Knowledge of multi-threading and synchronization in a driver environment
_ Strong understanding of OS kernel internals
_ Product architecture, design, implementation and testing experience
_ Ability to work independently with minimal supervision
_ 5+ years related experience.
DESCRIPTION OF FUNCTION & RESPONSIBILITY:
_ Interface with the ASIC teams on chip features and programming model
_ Develop and maintain key features for WIFI software on Windows OS platform
_ Support software releases during test and release cycles
9. Job Title: Software Engineer
Req Number: 2011056
Education:
BS or MS in Computer Science, Electrical Engineering or equivalent
Experience:
_ At least 2 years of Windows Driver development
_ Proficient in DDK programming
_ Proficient in C/C++ programming
_ Good problem solving skills, and is able to understand and able to relate
complex issues
_ Candidates have Windows GUI development experience are preferred.
_ Candidates have Bluetooth development experience are preferred
DESCRIPTION OF FUNCTION & RESPONSIBILITY:
_ Windows Driver software engineer will be responsible for developing
Bluetooth
host kernel stack in Windows platform.
10. Job Title: Application Engineer-Hardware
Req Number: 2010643
QUALIFICATION (DETAIL):
Education:
BS/MS degree in Electrical Engineering, or related field
Experience:
The person in this role should have the following capabilities and
qualifications:
Technical
BS/MS degree in Electrical Engineering, or related field
5+ years of applicable work experience on board design
Strong problem-solving skill to isolate and resolve issue
Experience with HW board design for switch/router/networking
Familiar with all the basic I/Os, such as SSSMII/SGMII/QSGMII/XAUI /PCI-E/
DRAM/NAND etc.
Experience with full product life cycle.
Non-Technical
Strong communication skill to interface with FAE, customer, R&D, marketing
and sales
Able to handle multi-tasks with priority
Excellent verbal and written communication skills in Chinese and English
Self motivated and quick learner
Willing to travel for on-site support
Good team player
DESCRIPTION OF FUNCTION & RESPONSIBILITY:
The main responsibilities for this position are:
Support customer to resolve issue for switch product line.
Guide customers for schematics and layout design
Writing tech documents including datasheet, app notes and schematics and
layout guideline etc
Design reference and demo board
Provide detailed technical training to FAE and customers
Help product definition with field feedback
11. Job Title: Application Engineer-Software Engineer
Req Number: 2011120
QUALIFICATION (DETAIL):
Education:
BS/MS degree in Electrical Engineering, Computer Science, or related field
Experience:
5+ years of applicable work experience
Strong problem-solving skill to isolate and resolve issue
Experience with switch/router/networking development, prefered with Driver
development
Experience with embedded Linux/VxWork or eCos/Nuclear OS
Experience with MIPS/ARM platform
Familiarity with co-working with hardware engineer for system issue
Knowledge of networking protocols and security concepts
Experience with full software life cycle and delivery mechanisms
DESCRIPTION OF FUNCTION & RESPONSIBILITY:
Write User Manual and Application Note for customer/FAE
Support customer to resolve issue for switch product line
Porting software/SDK for cusomter and develop customized application
Provide detailed technical training to FAE and customers
Help product definition with field feedback
12. Job Title:Sr.Digital Verification Engineer
Req Number: 2011107
QUALIFICATION (DETAIL):
Education:
BS/MS degree in Electrical Engineering, Computer Science, or related field
Experience:
Minimum of 7 years ASIC Verification experience in a product development
environment
-Proven verification and superior debugging skills in large ASIC designs
-Rich experience with Specman E or System Verilog or Vera or OpenVera
-Rich ASIC design skills is highly desirable
-Knowledge of data and telecommunication networking(IP/Ethernet) is a plus
-Experience with one or more scripting languages(TCL/Perl/Python) is desired
-Strong written and verbal communication skills
-Adaptable to evolving customer requirement
DESCRIPTION OF FUNCTION & RESPONSIBILITY:
-Lead a design verification team to fully verify ASIC product chip
-Develop reusable block-level and system-level ASIC testbenches using
Systemverilog
-Develop new ASIC verification environments to support ASIC development.
-Maintain existing ASIC verification environments.
-Define and develop application tests required to verify ASICs meet
functional and performance goals.
-Define and implement functional/code coverage plans.
-Develop testing and regression methodologies for new verification flow.
-Develop/maintain/enhance environment tools/scripts/makefiles.
13. Job Title: System Engineer
Req Number: 2010109 & 2011110
QUALIFICATION (DETAIL):
Education:
BS/MS degree in Electrical Engineering, Computer Science, or related field
Experience:
The Systems Engineer role requires:
• MSEE required
• Development and test experience including high speed digital and analog
design
• Development and test experience of baseband signal processing algorithms
• Understanding of system level performance issues
• Experience in analog and digital integration
• Experience in board level design
• Broad knowledge of industry standards and analog and digital design
techniques
• Working knowledge and design experience with embedded systems, firmware,
development tools, microcontrollers,
digital signal processing, mixed signal, analog, and power management.
DESCRIPTION OF FUNCTION & RESPONSIBILITY:
The Systems Engineer will be responsible for Ethernet switch chip definition
and bring up. In this role the Sr. Systems
Integration engineer will engage with the algorithms, analog, and digital
design teams, to prepare for initial silicon
bring up and performance evaluation. Feedback of chipset strengths and
weaknesses in early silicon bring up to
prepare for production silicon is also a key aspect of this role. This role
includes ownership of chip initialization
parameters and procedures, integration of hardware and software, and
conducting system level performance tests on
Ethernet switch platforms. In addition, the engineer will provide product
related technical services and support,
including: product specification assistance, debugging and testing of
customer platforms, and product training for
customers and internal development groups. The Sr. Systems Integration
Engineer will also generate system
architecture and application notes detailing system solutions for current
and future products.
In this position, you will be responsible for:
• Participating in definition and specification of system architectures.
• Review of test coverage for silicon characterization, board-level
reference design characterization, and software
performance testing.
• Integration of hardware, software, and chips into a system.
• Proving design through system-level acceptance testing.
• Independent review of optimal switch system parameters and configurations
and identification of performance
bottlenecks.
• System level analysis of customers' designs.
• Providing technical assistance to AE and production personnel related to
the use and application of products.
14. Job Title: Sr. Software Engineer
Req Number: 2011088&2011089
QUALIFICATION (DETAIL):
Education:
BS/MS degree in Electrical Engineering, Computer Science, or related field
Experience:
3 to 5 years of applicable work experience
Deep understanding of switch/router requirements and implementation
Deep understanding of switch chip architecture and requirements
Experience with ASIC emulation and silicon testing
Experience with embedded platform development
Experience with MIPS/ARM platform
Strong understanding of OS kernel internals
Knowledge of networking protocols and security concepts
Experience with full software life cycle and delivery mechanisms
DESCRIPTION OF FUNCTION & RESPONSIBILITY:
System Model Development
Perform emulation and silicon testing for SOC and Ethernet switch chips
Interface with hardware teams on ASIC design features and programming model
Assess and scope customer feature requests to determine engineering project
plan
Support software releases during test and release cycles
Write technical documents for system design
Provide technical support and training to field engineers and customers
15. Job Title:Software Engineer, Driver Software Development
Req Number: 2011090
QUALIFICATION (DETAIL):
Education:
BS/MS degree in Electrical Engineering, Computer Science, or related field
Experience:
2 to 4 years of applicable work experience
Experience with applications on embedded platforms
Knowledge of multi-threading and synchronization in a driver environment
Strong understanding of OS kernel internals especially Linux/Vxworks/Ecos
Familiarity with hardware debugging
Knowledge of networking protocols and security concepts
Product architecture, design, implementation and testing experience
Experience with OS tools and scripts such as makefiles, PERL, shell scripts
Experience with full software life cycle and delivery mechanisms
DESCRIPTION OF FUNCTION & RESPONSIBILITY:
Design and develop API's in the form of an SDK for customers
Perform emulation and silicon testing for SOC and Ethernet switch chips
Interface with hardware teams on ASIC design features and programming model
Support software releases during test and release cycles
Write technical documents for platform software
Provide technical support and training to field engineers and customers
16. Job Title:Software Engineer
Req Number: 2011103
QUALIFICATION (DETAIL):
Education:
BS/MS degree in Electrical Engineering, Computer Science, or related field
Experience:
2 to 4 years of applicable work experience
Experience with applications on embedded platforms
Experience with L2/L3 network protocols and configuration on Linux or Vxworks
Knowledge of multi-threading and synchronization in a driver environment
Strong understanding of OS kernel internals especially Linux/Vxworks/Ecos
Familiarity with hardware debugging
Knowledge of networking protocols and security concepts
Product architecture, design, implementation and testing experience
Experience with OS tools and scripts such as makefiles, PERL, shell scripts
Experience with full software life cycle and delivery mechanisms
DESCRIPTION OF FUNCTION & RESPONSIBILITY:
Develop system solutions software for
Enabling Web management L2/L3 switch
Enabling L2/L3 network protocols L2/L3 switch
Design and develop API's in the form of an SDK for customers
Interface with hardware teams on ASIC hardware acceleration design features
and programming model
Support software releases during test and release cycles
Write technical documents for platform software
Provide technical support and training to the field engineers and customers
17. Job Title:Software Engineer
Req Number: 2011108
QUALIFICATION (DETAIL):
Education:
BS/MS degree in Electrical Engineering, Computer Science, or related field
Experience:
2 to 5 years of applicable work experience
Experience with switch test
Experience with test equipments such as Smartbits/IXIA
Experience with developing automation infrastructure and processes
Experience with tools and scripts such as Perl, TCL, makefiles, shell scripts
Familiarity with hardware debugging
Knowledge of L2 and L3 network protocols and security concepts
Knowledge of network device drivers
Knowledge of different operating system test requirements
DESCRIPTION OF FUNCTION & RESPONSIBILITY:
Design, develop test platform
Design, develop and run tests for
Ethernet Switch Emulation
Ethernet L2 and L3 switch software
Regression, performance, functionality and stress
Certification and interoperability
Support all test beds and test activities
Support nightly regression testing
Provide metrics of software quality and resource utilization
Assess and scope feature requests to determine engineering test plans and
resourcing
18. Job Title: SR. AE
QUALIFICATION (DETAIL):
Education:
BSEE/CS minimum. MSEE/CS preferred.
Experience:
_ 5+ years of experience developing software for Routers, carrier class 5+
years of
experience developing wireless driver and/or other networking driver for
Tablet or
Netbook.
_ Experience with Network layer stack preferred.
_ Strong and in depth in embedded sw development.
_ Must have experience with C program.
_ Experience with Linux OS and other related OS a plus.
_ Must be self motivated with good communication skills and an investigative
spirit.
_ Ability to rapidly learn multiple areas.
_ Ability to react to customer needs coupled with superior problem solving
and debug
capabilities.
_ Experience in PCIe/USB interface.
DESCRIPTION OF FUNCTION & RESPONSIBILITY:
Develop and maintain key features for Wireless software on an embedded OS, a
Linux
and/or Windows OS platform. The role establishes this person as the
technical expert for
specific products and the relevant domain. Must have high technical
competence and be
able to provide in-depth technical responses to customers and to the company'
s Field
Applications Engineers, during the pre-sales process. Once engaged with a
customer,
must be able to map out the technical details of a system
integration plan, from project start through mass production. Will also be
involved in
qualifying and working with third party partners.
19. Job Title: Physical Design Engineer
Req Number:2010456
QUALIFICATION (DETAIL):
Education:
BSEE or MSEE
Experience:
_ 2+ years of experience in ASIC backend design.
_ Knowledge of following process from netlist handoff to tapeout is a must:
_ Floorplanning
_ Power planning and signoff
_ Placement, CTS and routing
_ SI effect analysis and fixing
_ Physical verification
_ Hands-on experience on above items is preferred.
_ Experience in develop scripts in Perl and TCL.
DESCRIPTION OF FUNCTION & RESPONSIBILITY:
_ Implement APR from netlist to gds to close timing and routing
_ Build high efficient PG mesh to meet IR-drop and EM requirements
_ Fix SI effect
_ Perform ECO and metal spin
_ Support die size estimation
_ Develop utilities/scripts to improve design flow
20. Job Title: Library Development Engineer
Req Number:2010749
QUALIFICATION (DETAIL):
Education:
BSEE with 2+ years related experience required, MSEE with related project
experience
preferred
Experience:
_ BSEE with 2+ years related experience required, MSEE with related project
experience preferred
_ Ability to write Perl script to do routine jobs.
_ Deep understanding of digital IC circuit/layout design, optimizing method.
_ Familiar with HSPICE/SPECTRE.
_ Basic knowledge of Verilog/Synopsys model syntax.
_ Must be self motivated with good communication skills, quick learner and an
investigative spirit.
DESCRIPTION OF FUNCTION & RESPONSIBILITY:
_ Circuit/Layout design of STD/IP library.
_ STD/ IP block characterization and modelling, library maitainness, flow
support
【About Atheros】
Welcoming individual contributors to a world-class team Atheros
Communications (
www.atheros.com) is a fabless semiconductor company that
delivers the technologies that keep people connected - to each ther and to
the world around them. Atheros' highly integrated chipsets provide wired and
wireless connectivity for the world's leading brands of PCs, consumer
electronics, networking devices and mobile handsets. Headquartered in
California's Silicon Valley, the company was founded in 1998, went public in
2004 and is now one of the fastest growing silicon vendors. Although past
the start-up phase, Atheros is still a place where individuals can make
significant contributions, and employees feel like they are part of
something big. Because Atheros is involved in so many exciting markets, you
will be exposed to some of the hottest new products and technologies - right
from the beginning of your career at Atheros.
With offices throughout the world, Atheros also appreciates ethnic and
cultural diversity. Atheros established its Shanghai, China operation in May
of 2005. The company is located in Zhangjiang High-tech Park, the region's
technology hub. This area is widely known for having China's largest
concentration of semiconductor companies, and is the site of many of the
world's leading R&D centers for chip design, development and production.
Atheros' Shanghai operation is a fully-operational research and development
center. Here, we continue to cultivate a strong engineering organization
that now numbers over 300 - to support the entire Asia Pacific region,
including Korea, Japan and Taiwan. Our highly skilled engineers work on a
wide array of projects from conception to completion - investigation,
specification, development and product release - as well as applications
engineering support. The organization supports the breadth of the growing
Atheros product portfolio - including WLAN solutions for home, office and
mobile, Powerline (PLC), PAS/PHS, Wireless Network Processors, Gigabit and
Fast Ethernet, GPS and Bluetooth solutions.
Atheros is that rare kind of company that combines an appreciation of
individual contributions with supportive teamwork. You'll experience this
right away as you get working on advanced wired and wireless products that
appear on retail shelves worldwide within a short matter of months. You'll
work with, and learn from, the industry's best and brightest people who, in
turn, will look to you for fresh approaches and new ideas. You'll see that
our passion for excellence and connectivity know-how has resulted in a can-
do culture where we focus on solutions, not problems.
Our matrixed organization, with minimal hierarchy, provides a spectrum of
growth opportunities. And, we promote from within so you'll enjoy the fruits
of your discoveries and accomplishments. The Atheros culture offers abundant
opportunities for travel, professional networking and customer relationship
building.
Join us and take charge of your future.
A recognized contributor to a world-class team!
ATHEROS Shanghai Co.,Ltd.
690 Bibo Road, 1/4F, Building 9,
Zhangjiang High-Tech Park
Shanghai 201203
t 86 21 61820900
f 86 21 50270100
www.atheros.com以上信息由
成电人-电子科技大学校友网 www.UESTCer.com 转载
[ 此帖被zychen在2011-03-10 10:30重新编辑 ]
